Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What does everyone do for a living?
#26
balage Wrote:Hah another line by me.
Sokkia, Geodimeter, Quante, Leica....? Anything?
(if nothing it's not strange, I don't know the Us made instruments. 165 )

LEICA. definitely. i've used trimble R8's before, and alot of different leica stations. the only way to go, really.

For this summer, I'll be using:
GPS1200, and TPS800
Black '02 XE CC LB 4x4. Manual. 3" Calmini SL, with a few other assorted Calmini odds 'n ends... Warn XD9000i, 32X11.5 BFG A/T's.

Its a work in progress....
Reply
#27
dhmachine86 Wrote:
balage Wrote:Hah another line by me.
Sokkia, Geodimeter, Quante, Leica....? Anything?
(if nothing it's not strange, I don't know the Us made instruments. 165 )

LEICA. definitely. i've used trimble R8's before, and alot of different leica stations. the only way to go, really.

For this summer, I'll be using:
GPS1200, and TPS800
Oh yes... 164
[Image: 5260151.jpeg]
Reply
#28
I currently go to school for a bachelors in BIO. Which will allow me to enter into the Physical therapy program at San Antonio. I am currently working under a special grant at a local high school. I help students with their: college applications, scholarships, and financial aid.
Performance: Magnaflow dual in dual out but not a true dual our cause of the hole spare tire issue, K&N Cold Air Intake, WRP IMS coming soon...
Exterior: 20" Liquid Metal Magma's wraped with 285/50R20 cooper xst's
Interior: Siruis Satillite radio, Avic-D3, and waiting for delivery of MTX Thunderform box with a Pioneer sub and JL audio amp
Reply
#29
This is what I do every day...
Play with mud, offroad, looking the dinosaur fight.... 202
I'm not on the picture...the mud was too big 187 165
[attachment=4][attachment=3][attachment=2][attachment=1][attachment=0]


Attached Files Thumbnail(s)
                   
[Image: 5260151.jpeg]
Reply
#30
I hate GIS
07 SE KC 4x4 6M M226 3.538 10"R/10"F Wheel Travel
Volant CAI
SuperChip Tuned
FlowMaster Delta 50 2.25" 2 in 1 out Y-Pipe
PRG Frontier Titan Swap 4" Lift In Front; 2.0 Radflos, SPC UCA
Shackle/Leaf/Bilstein - 3" Lift In Rear
Rock Sliders And Shrockworks Skid Plate Set

285/75/16 Goodyear Wranglers
Reply
#31
BlackTigerSE Wrote:I hate GIS
Ok! 187



And what is the GIS? 165

Government Information Service 179
[Image: 5260151.jpeg]
Reply
#32
DoD Contractor
2005 NISMO KC 4X4 - BLK

Current Config: K&N CAI : Custom Exhaust : WRP Intake Manifold Spacer : WRP Crank Pulley : WRP Pwr Steering Pulley : WRP Grounding Kit : 2* Timing Advance : Redline Tuning Hood Struts : Penski Sliders : 2.5" PRG-Mini Lift : 2" 4Crawler Body Lift : Titan Bilstein Shocks : Shrockworks Bumper : Ramsey Patriot 9500 UT Winch : PIAA 520 SMR's : BFGoodrich AT's @ 285/75R16 : KMA MultiCarrier Rear Bumper
Reply
#33
I am a closing agent for Wachovia...but working my way into IT 165
Smokin'
2006 Storm Gray KC NISMO 4X4
Reply
#34
i am a part time postman, part time party animal, part time asian, part time pacific islander, full time good lookin....i know tough jobs but someone's gotta do them.... 201
"it does not matter who started the thread, at the end of the day i will be it's last poster...."
[Image: carph3.jpg]
Reply
#35
carphreak Wrote:i am a part time postman, part time party animal, part time asian, part time pacific islander, full time good lookin....i know tough jobs but someone's gotta do them.... 201

That is funny right there. I don't care who you are.
06 nismo CC 4X4: SOLD and replaced with 2017 Jeep Unlimited Rubicon; Teraflex 3" lift, 315/70-17 Cooper STT PRO tires on Fuel Trophy wheels, JCR bumpers front and rear w/Warn 9.5cti winch in front, Ace sliders, GraBars, Weathertech window deflectors and floor liners
98 Jeep Wrangler in the garage, 2" lift, 33X12.50 BFG MTs on 15X8 MT Classic Locks, Pioneer/MTX/RF P3 Sound, Borla Header w/Flowmaster
63 and 67 Nissan Patrols (under construction)
Reply
#36
Manage for Costco Wholesale (23 years)
[Image: sigph.jpg]
Reply
#37
Well I punch a clock at the Main Houston Post Office..in the Maintenance Dept. Kinda like the Hi/Lo Orielly for the Mail processing equipment...lol I say punch a clock cause sometimes I don't work very hard... 165 Oh and I'm Full time goodlooking! LOL
[Image: blackhoops.jpg][Image: goodcoverpic.jpg]


Happiness Is Beating Bama in Anything, Anytime, Anywhere.

For Balage:
"A A leghalálosabb fegyver a világon van egy Tengeri és -a puska"
"The deadliest weapon in the world is a Marine and his rifle"
04' Deep Water LE 4x4 CC Off-Road Big Tow, PRG Mini Kit 2" Front 1" Rear, PRG Shackles, Nitto Terra Grapplers 295 70/17, Painted Aluminum Diff Cover, Blue Activetuning Grounding Kit, 8000K HID Lows, Silver Star High & Turns, Flowmaster 40, VOLANT GEN III CAI, Throttle Body Screen Mod, UpRev 2 Deg. Timing Advance, JL Audio Cleansweep, Sony Explode 4ch Amp, Cadence 6.5" Components, (2) Kenwood KFC-W2511 10" Subs, Vshortt Built Custom Box, Clarion APX-1300 400 watt Amp, Black Billet 9" Antenna, 4 piece Painted Billet Grill inserts, (2) 8" Procomp 130 watt Off-Road Lights, (2) 55 watt Back-up Lights, Misery-Tom Fog Light Jumper Mod, AVS Smoked Hood Deflector, [b]Custom Painted Engine Cover IV with matching CAI lid.



SEMPER FI
WAR EAGLE
Reply
#38
The Wzrd, like Okie is Retired from work, not from Life.
'05 KC NISMO 6 spd.'08 Rogue SL AWD
Reply
#39
Should be in my 4th year, but i took a 1 year break. I'll be in my 3rd year soon. Going for a double major in history and a geography. Gain some experience in GIS (geographic information system) during my school years and get EMT certificatied and maybe continue in that field until i become a paramedic. I always wanted to be a park ranger...but with the type of experience and learning i have, i don't think i will be qualified/working with wildlife(animals out in the forest). I guess i plan on becoming an URBAN PARK RANGER...? I heard the pay isn't that bad...50k+ a year. It will be something i enjoy. But thats another 2 more years.
07 SE KC 4x4 6M M226 3.538 10"R/10"F Wheel Travel
Volant CAI
SuperChip Tuned
FlowMaster Delta 50 2.25" 2 in 1 out Y-Pipe
PRG Frontier Titan Swap 4" Lift In Front; 2.0 Radflos, SPC UCA
Shackle/Leaf/Bilstein - 3" Lift In Rear
Rock Sliders And Shrockworks Skid Plate Set

285/75/16 Goodyear Wranglers
Reply
#40
I work for the US Navy Tongue

more specificly i work on everything from communtications gear to HIGH end radars. been in for a little over a year now....


This is my Other ride other then the frontier Big Grin

[Image: 610x.jpg]
2011 Camaro SS/RS
6.2L LS3, Mods: CAI Inc. CAI, Hurst Short throw shifter, Doug Thorely shorty headers, Flomaster American Thunder cat back.
2004 XE 2.4l I-4(sold)
part of The Lifted XE Club!
F.W.O West Coast Chapter

MODS: Total Chaos Long Travel Kit, Shock Hoops, Fox 2.5 coil overs w/ eitbach springs, Fiberglass Fenders, Dever progessive add a leafs, Panasonic CQ-C7303U Clarion 4 channel 400W amp pushing a set of JL audio 6.5 Compents, MA Audio 400w 2 channel amp pushing Kicker Comp 10", XM Radio, Magnaflow 2 1/4 in/out dumped before the axle. 5% tint on rear windows 35% on front windows, oval fog lights from kragen.

Reply
#41
Nice boat!!! Thanks again, by the way!!! [Image: usflag.gif]
06 nismo CC 4X4: SOLD and replaced with 2017 Jeep Unlimited Rubicon; Teraflex 3" lift, 315/70-17 Cooper STT PRO tires on Fuel Trophy wheels, JCR bumpers front and rear w/Warn 9.5cti winch in front, Ace sliders, GraBars, Weathertech window deflectors and floor liners
98 Jeep Wrangler in the garage, 2" lift, 33X12.50 BFG MTs on 15X8 MT Classic Locks, Pioneer/MTX/RF P3 Sound, Borla Header w/Flowmaster
63 and 67 Nissan Patrols (under construction)
Reply
#42
Im a manufacturing engineer for General Electric. I work in the generator business as part of the manufacturing team that assembles huge, power plant sized generators. You dont really appreciate it until you see a 400 Ton unit being hoisted 20 feet in the air to be moved 500' down the shop to be placed on a rail car. Wild.
Reply
#43
cdahlberg Wrote:Im a manufacturing engineer for General Electric. I work in the generator business as part of the manufacturing team that assembles huge, power plant sized generators. You dont really appreciate it until you see a 400 Ton unit being hoisted 20 feet in the air to be moved 500' down the shop to be placed on a rail car. Wild.

I interviewed with GE Schenectady, but wasn't interested in traveling the world as a Field Engineer on turbine installs.
06 nismo CC 4X4: SOLD and replaced with 2017 Jeep Unlimited Rubicon; Teraflex 3" lift, 315/70-17 Cooper STT PRO tires on Fuel Trophy wheels, JCR bumpers front and rear w/Warn 9.5cti winch in front, Ace sliders, GraBars, Weathertech window deflectors and floor liners
98 Jeep Wrangler in the garage, 2" lift, 33X12.50 BFG MTs on 15X8 MT Classic Locks, Pioneer/MTX/RF P3 Sound, Borla Header w/Flowmaster
63 and 67 Nissan Patrols (under construction)
Reply
#44
As for me, as little as possible! 204
06 nismo CC 4X4: SOLD and replaced with 2017 Jeep Unlimited Rubicon; Teraflex 3" lift, 315/70-17 Cooper STT PRO tires on Fuel Trophy wheels, JCR bumpers front and rear w/Warn 9.5cti winch in front, Ace sliders, GraBars, Weathertech window deflectors and floor liners
98 Jeep Wrangler in the garage, 2" lift, 33X12.50 BFG MTs on 15X8 MT Classic Locks, Pioneer/MTX/RF P3 Sound, Borla Header w/Flowmaster
63 and 67 Nissan Patrols (under construction)
Reply
#45
I'm starting on the 26th my second installment of the class part of my apprenticeship. It drives me nuts having to sit in a tiny desk all day after I've been on my feet working every day. 181
06 NISMO - 2" PRG spacer/deaver - Banks Power - Cooper STT's on Pathfinder wheels - PIAA's
06 Titan - 2" PRG spacer/blocks - Banks Power - Volant - 33" Toyos - Carriage works grille - Bully dog tuner
91 Hardbody SEV6 Auto 4x4. 95 frame. 2" suspension lift ARB springs Calmini UCA/shackles SwayAway T-bars. 2" body lift. Custom exhaust with magnaflow. 33x12.5R15 DC MC Tires on 15x10 Ultra 50/51 aluminum wheels. Custom bed, sliders, and bumpers coming soon!
66 Patrol.... it's orange...

Reply
#46
I was a industrail mechanic and a millwright but recently got laid off here in miami. The company went out of business 1 week before christmas. So as of right now i am not employed at all.
Reply
#47
dad2dannyjr Wrote:I was a industrail mechanic and a millwright but recently got laid off here in miami. The company went out of business 1 week before christmas. So as of right now i am not employed at all.

168 and welcome to frontyspot.
Sorry to hear that you lost your job. I am afraid that is going to be a story for alot of people. 171
05 Nissan Frontier 4x4, Stillen SuperCharger, BFG AT's Tongue
Reply
#48
Heavy wrecker operator...

[Image: 019.jpg]

[Image: getrdone.jpg]

[Image: 062.jpg]

[Image: 065.jpg]

[Image: daw.jpg]
2002 Electric Blue CC 2WD...K&N FIPK II Cold Air Kit, Venom400 ECU Booster, Venom 44PSI Injectors, Self Fabbed Throttle Body Spacer, AirRide Technolgies Rear Airbag Load Boosters, Micro LED Accent Lighing for the Interior, Sumitomo HTR AT II, Victory Alloys,Secondary Cats Removed w/ custom made X Pipe and Flowmaster 40's, Few other hidden features...
[Image: 1233809663.jpg]
Reply
#49
Nitewulf I like this!!! 185
[Image: 5260151.jpeg]
Reply
#50
179 how in the heck do you get those big rigs turned upright?
05 Nissan Frontier 4x4, Stillen SuperCharger, BFG AT's Tongue
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  What does everyone do for a living? Sandiegan05fronty 40 25,464 11-14-2007, 05:59 AM
Last Post: Zero Six LE

Forum Jump:


Users browsing this thread: 1 Guest(s)